Swimming Pool Cleaning Tips

The idea of maintaining a sparkling clear swimming pool is not as hectic and cumbrous as you think it is. The secret to a refreshing swimming pool is routine check, care, and several Pool maintenance tips to be kept in mind. Common problems like algae growth, murky waters, broken pumps and filters, unwanted dirt and leaves and much more emerges frequently, and one must have an ample knowledge about Swimming pool cleaning tips for algae removal and products to be put to use to eliminate them for a crystal clear pool. The pool water remains exposed to several contaminations throughout the day and night, which can give way to several air-borne diseases. Thus, cleaning your swimming pool by yourself or appointing a service technician to accomplish this task becomes imperative.

One of the best ways to dip down the heating temperatures of the season is by diving into blue waters of your pool, with luxurious house parties and fun get-togethers near poolside. What matters is the cleanliness around the pool, which creates a lasting impression on the guests. Follow certain Swimming pool cleaning tips in order to maintain the hygiene levels of the pool. Usage of Algi Bloc can prove to be very productive for scrubbing the corners and the pool surfaces. Also, one must be careful enough while using the product as they can affect the PH levels of the water to a great extent, and can cause major skin problems if overused. Keep in mind some useful pool cleaning and maintenance tips before getting started.

The secret to a sparkling brilliant swimming pool is regular maintenance. This does not need to be a difficult or onerous task. The obvious requirements are

Circulation – 8/10 hours per night
Filtration – happens with the circulation
Cleaning – vacuum and brush once per week (leaves, dust, etc)

The less obvious requirements are

Testing – pH test with phenol red, a very simple test, 6 drops in the test tube, compare to the chart.

Most pools creep the pH up, so add acid to bring down to 7.2

  • Chlorine test, 6 drops in the test tube, compare to the chart. Ideal level 0.8 – 1.0
  • ALGIBLOC. This copper based product kills algae and will last up to 6 months. Most of the recommended dosage of chlorine in the pool, is to kill algae. The ideal level of chlorine in the pool as a sanitiser is 2mg/L, but when you’re dosing to kill algae the level required is 10mg/L. and chlorine only lasts a few days so regular dosing is required. When ALGIBLOC is used to control the algae, you only need to add chlorine when you’re going to swim and then only at low levels.

Swimming pool maintenance the easy way!

How to use ALGI BLOC

Maintaining crystal clear pool water throughout the year is as easy as following these 4 steps:

  1. Adjust the pH level in your pool to between 7.2 and 7.6.
  2. Add the recommended dose of ALGI BLOC to the water.
  3. Run your pump to mix in the ALGI BLOC evenly and to filter dust and leaves that fall into the pool.
  4. Add chlorine to kill bacteria just prior to swimming.

 

Chlorine use

Only two applications of ALGI BLOC a year will keep your pool water crystal clear without any chlorine. However, you still need to use chlorine in order to kill bacteria. So for your personal hygiene, use the recommended dose of chlorine just before swimming.

 

Winterising your pool

When the swimming season ends, just use the recommended dose of ALGI BLOC and ensure that the correct pH (7.2 – 7.6) is maintained. Your pool will stay crystal clear all winter!

 

Pool cleaning tips:

Green Water

Problem:
Green or black patches in pool, cloudy water.

Cause:
Green algae or fungus infestation.

Treatment:

  1. Adjust pH to between 7.2 and 7.6.
  2. Loosen algae from the walls and the bottom of your pool by brushing.
  3. Apply recommended dose of ALGI BLOC.
  4. Mix evenly into the pool water by circulating with pump operating for at least 8 hours.
  5. Allow time for the algae to be killed (3-5 days).
  6. Remove dead algae by using your filter or vacuum.
  7. If pool is still a little cloudy, superchlorinate the water as recommended by the manufacturers (usually 3 to 4 times normal chlorine dosage) and filter until clear.
  8. Check the pH level every couple of weeks and maintain it at the correct level.

 

Cloudy Water

Problem:
Cloudy water – hazy water which lacks clarity.

Cause:

  • Dead algae in water
  • Early algae growth
  • Poor filter operation
  • Incorrect pH

Treatment:

  1. Adjust pH to between 7.2 and 7.6.
  2. Check the filter and clean if necessary.
  3. Use recommended dose of ALGI BLOC and filter for 1-2 days.
  4. If still not clear, check filter operation. If the problem is not with the filter, add water clarifier.

 

Scale Build-up

Problem:
Scale formation – calcium build-up on pool surface leaving rough, discoloured patches.

Cause:

  • Hard water
  • Excessive chlorine usage
  • Incorrect pH

Treatment:

  1. Adjust pH to between 7.2 and 7.6.
  2. If scale is severe, replace some of the pool water with fresh water.
  3. To remove scale consult our hotline as there are different treatments for different types of pools. Hotline number (03) 9437 2712

 


flip 1

FREE TEST KIT

FOR ON-LINE ORDERS OVER $40.

SPEND OVER $60 TO GET FREE SHIPPING AND A FREE TEST KIT.

We Accept
  • Paypal
  • Master card
  • Visa